PTE-HHDS

(Hand Held Dispensing System)

Easy-to-use hand-held dispensing equipment for low to medium viscosity two part component resin systems. The hand-held dispensing systems consists of a dispenser, dual-barrel cartridge and a helix designed static mixer. The pneumatic unit is connected to a shop air compressor and dispenses material continuously as the trigger is released. The manual unit operates similar to a caulk gun. The dual-barrel cartridges are made from polypropylene to withstand abuse. The cartridges have a capacity of 50-400ml and are available in mix ratios of 1:1; 2:1; 4:1; and 10:1 by volume. Helix designed nozzles are also available.

Cartridge Kits

Ideally suited for "quick set" urethanes, these dual cylinder polycarbonate cartridge kits are the perfect match with the PTE-HHDS dispensing systems. These cartridges hold a maximum of 400ml. When ordering, specify 1:1; 2:1; 4:1; and 10:1 mix ratios.

Static Mix Nozzles

The static Mix Nozzles are used with the PTE=HHDS dispensing system. The mixer element was designed to provide less resistance while dispensing. The mixer/nozzle comes in a variety of sizes and will mix virtually any part material including epoxies, silicones, and urethanes.

PTE-MMDS

(Meter Mix Dispensing System)

A variable ratio, two component meter-mix dispensing system. Materials with low to medium viscosity are recommended for this machine. Double action metering cylinders allow continuous, on demand flow or individually metered "volumetric shots" of mixed materials. There is no reload delay between parts. A combination of air powered metering pumps, Snuf-Bak dispensing valve, and disposable mix nozzles, produce high quality air-free blending of meter-mix casting materials used in today's rapid prototyping industry.

MCP Vacuum Casting Systems

PTE Distribution offers MCP's turnkey Vacuum Casting System. A fully automated process producing dimensionally stable, precision prototypes that are tolerant to the rigors of pre-market testing and evaluation. Able to replicate complex shapes, fine details, textures and colors. Vacuum casting resins are formulated to simulate production thermoplastics and elastomers. After master model preparation and the production of a silicone tool, the MCP system will deliver multiple castings within hours. Manufactures experience savings of  90% in cost and 95% in time compared to traditional cut prototype tooling for injection molding. These techniques allow multiple design and manufacturing options to be fully assessed. The MCP Vacuum Casting System will continue to be first to prove tomorrow's products with high quality, cost effective rapid prototyping solutions.

Vacuum Chamber  VS-1000

Use of  this vacuum chamber assembly provides for a complete "semi" desktop system. Along with the 5 cfm 1/2 horsepower pump delivering 29" Hg, this chamber consists of an acrylic top to view the degassing process.  Another bonus is the 15.25" diameter and 16" depth allowing for a five gallon bucket to be placed neatly inside.

Warming Oven "Bench Model" (not shown)

If space is limited this bench model is the one for you. Workspace dimensions of 28" wide x 24" deep x 18" high is more than enough to assist with the preheating of silicone rubber molds and the acceleration of polyurethane cure times. Some other standard features include: portability, for forced air circulation, welded steel construction, a calibrated temperature controller: and the ability to be wired in either 115 or 230 volts.

Warming Oven "Stand Alone"

This oven is used for the preheating of silicone rubber molds and accelerating cure times of polyurethanes. Capacity ( inside dimensions: 60" wide x 28" deep x 55" high) is the main benefit of this oven, but don't miss the many other features it has to offer. Rugged frame steel construction in 1/8" welded interior and 18ga. exterior skins, heavy duty hinges, truck type door locks, and gasketed doors seal in heat. An adjustable digital controller assists in maintaining a proper molding temperature. 

Pressure Tanks

These pressure tanks are fabricated to ASME Standards. They are certified and permanently labeled for 110 PSIG maximum working pressure. Tanks are contructed from galvanized steel with plated, gasketed head, safety pressure-release valve, and concave bottom for "clean" draining. Tanks may be purchased in 5 gallon, 10 gallon, 15 gallon, 30 gallon, and 60 gallon sizes. Tanks come equipped with regulator.